AIRLOCK Voyage

Instructions

Installation Manual

SETUP TIME | <5 MINUTES

CAUTION!
PLEASE READ

For indoor use only.

Ensure the cable is not in contact with hot areas.

Do not block airflow to the air inlet and outlet.

Do not use the device if its cord is damaged.

Do not use the device if it has been damaged by water.

Maximum ambient temperature in which the device shall
be used is 130°F/55°C.

Step 1
Mount
the device
  • AIRLOCK Voyage can be installed in multiple ways to accommodate the unique
    design and size of your boat or RV.
  • Ensure the device is placed securely for optimal air
    circulation.
  • Avoid placing the device in areas where water exposure, excessive heat, or direct
    sun might occur.
Option A
COUNTERTOP WITH NON-SLIP PAD
  • Use a soft cloth to clean the surface where the device will sit, ensuring the surface is dry and free of dust, grease, or oil.
  • Place the provided non-slip pad on the cleaned surface.
  • Set the AIRLOCK Voyage directly on the pad ensuring it is
    stable and secure.
Option B
WINDOW MOUNT WITH SUCTION CUPS
  • Attach the three suction cups to the corresponding slots on the bottom of the device's pedestal.
  • Clean the window or surface where the suction cups will be applied using a soft, dry cloth.
  • Press the suction cups firmly onto the window and hold for at least 10 seconds to ensure a secure fit.
Step 2
Power Up

Connect the device to a power source using one of the following methods:

  • Use the 12V Power Cord to connect it to a power socket (also known as a cigarette lighter power socket).
  • Use the 110-220V AC Adapter to connect it to a standard wall outlet.
  • Once connected, you will hear a sound, and the indicator light will briefly flash to confirm the device is powered.
Step 3
Turn On

Touch the POWER button. You will hear a sound, and the purple indicator light will illuminate. The device will then enter operating mode, activating the fan, ionizer, and UVC purification system.

Timer setting (optional):

  • Press the TIMER button once for a 2-hour timer or twice for a 4-hour timer.
  • You’ll hear a tone, and the indicator light will flash (once or twice). The device will shut off automatically after the set time.